谢谢精彩分享
DIFF:EMA(DCLOSE,12)-EMA(DCLOSE,26); DEA:EMA(DIFF,9),COLORFFFF00; MACDDIFF-DEA)*2; STICKLINE(MACD>=0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORRED; STICKLINE(MACD>=0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLORGREEN; STICKLINE(MACD<=0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORFF00FF; STICKLINE(MACD<=0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLOR00FFFF;多转空:=((((LLV(MACD,4)>0) AND (MACD<REF(MACD,1))) AND (REF(MACD,1)>REF(MACD,2))) AND (REF(MACD,2)>REF(MACD,3)));空转多:=((((HHV(MACD,4)<0) AND (MACD>REF(MACD,1))) AND (REF(MACD,1)<REF(MACD,2))) AND (REF(MACD,2)<REF(MACD,3))); DRAWICON(多转空,MACD,2); DRAWICON(空转多,MACD,1);低位金叉:=CROSS(DIFF,DEA) AND DIFF<-0.1; DRAWTEXT(低位金叉,DEA,'低位金叉'),COLORFF00FF; JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1; STICKLINE(二次金叉,0,0.2,2,0),COLORFF00FF; DRAWTEXT(二次金叉,DEA*1.06,'二次金叉'),COLORRED; A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA); DRAWTEXT(底背离,-0.2-MACD,'底背离'),COLORWHITE; A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));顶背离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF); DRAWTEXT(顶背离,0.2+MACD,'顶背离'),COLORWHITE;
学习是为了进步
{黄金精准线}
百分比:=5;
右数峰序:=2;
MA5:MA(C,5);
MA10:MA(C,10);
MA20:MA(C,20);
波谷值:=CONST(TROUGH(2,百分比,1));{前M个ZIG转向波谷值}
波谷距离:= 1+CONST(TROUGHBARS(2,百分比,1)),NODRAW;{前M个ZIG转向波谷到当前距离}
{例如:TROUGH(2,5,2)表示%5最低价ZIG转向的前2个波谷到当前的周期数};
波峰值:=CONST(PEAK(1,百分比,右数峰序));
{例如EAK(1,5,1)表示%5最高价ZIG转向的上一个波峰的数值}
允许误差:=0.024;
XG:= ABS(波峰值-波谷值)<=允许误差 {AND BARSCOUNT(V)>60};
波峰距离:= 1+CONST(PEAKBARS(1,百分比,右数峰序)),NODRAW;
{PEAKBARS(K,N,M)表示之字转向ZIG(K,N)的前M个波峰到当前的周期数,M必须大于等于1}
距离:=CURRBARSCOUNT;
DRAWLINE(距离=波峰距离 AND XG,波谷值,距离=1,波谷值,1),COLORMAGENTA;
DRAWTEXT(距离=波谷距离 AND XG,L*0.98,' 精准峰谷线'),COLORYELLOW;
DRAWICON(距离=波峰距离,H*1.01,2);{波峰位置}
DRAWICON(距离=波谷距离,L*0.985,1);{波谷位置}
精准点:=(ABS(H-波谷值)<=允许误差 OR ABS(L-波谷值)<=0.024) {AND 距离<=120};
STICKLINE(精准点,波谷值,波谷值,18,1),COLORYELLOW;
{量柱}
LAST3K:=CURRBARSCOUNT>4;
上涨:=REF(CLOSE,3)>REF(CLOSE,4);
未跌破:=REF(CLOSE,2)>REF(LOW,3) AND REF(CLOSE,1)>REF(LOW,3) AND CLOSE>REF(LOW,3);
缩量:=REF(VOL,3)>0.35*(REF(VOL,1)+REF(VOL,2)+VOL) AND REF(VOL,3)>REF(VOL,2);{1.05/3,5%}
逐级缩量:=REF(VOL,3)>=REF(VOL,2) AND REF(VOL,2)>=REF(VOL,1) AND REF(VOL,1)>=VOL;{平量也看成缩量}
逐级价升:=REF(CLOSE,3)<REF(CLOSE,2) AND REF(CLOSE,2)<=REF(CLOSE,1) AND REF(CLOSE,1)<=CLOSE;
{倍量柱}
倍量1:=(REF(VOL,3)>=REF(VOL,4)*1.91),NODRAW;{实际给1.91倍}
倍量:VOL>REF(VOL,1)*1.91,NODRAW,COLORWHITE;
{高量柱}
高量1:=REF(VOL,3)>REF(HHV(VOL,3),4) AND REF(VOL,3)>HHV(VOL,3),NODRAW,COLORWHITE;
TEMP1:=BACKSET(高量1,4);
高量:FILTER(TEMP1,3),NODRAW,COLORWHITE;
{将军柱}
将军1:=上涨 AND 未跌破 AND (倍量1 OR 高量1),NODRAW,COLORYELLOW;
{黄金柱}
黄金1:=将军1 AND 缩量,NODRAW,COLORYELLOW;
{标准黄金柱}
准黄金1:=黄金1 AND 逐级缩量 AND 逐级价升,NODRAW,COLORRED;
将军2:=将军1 AND 黄金1=0 AND BARSLAST(REF(将军1,1))>1;
黄金2:=黄金1 AND 准黄金1=0 AND BARSLAST(REF(将军1,1))>1;
将军3:=BACKSET(将军2,4);
将军:FILTER(将军3,3),NODRAW,COLORWHITE;
黄金3:=BACKSET(黄金2,4);
黄金:FILTER(黄金3,3),NODRAW,COLORYELLOW;
准黄金2:=BACKSET(准黄金1,4);
准黄金:FILTER(准黄金2,3),NODRAW,COLORRED;
{输出,规则是连续都满足条件则取第一个}
DRAWICON(LAST3K AND 准黄金,HIGH*1.01,26),COLORRED;
DRAWICON(LAST3K AND 黄金,HIGH*1.01,25),COLORRED;
DRAWICON(LAST3K AND 将军,HIGH*1.01,24),COLORRED;
STICKLINE(C,REF(L,BARSLAST(准黄金)),REF(L,BARSLAST(准黄金)),2,0),COLORYELLOW;
STICKLINE(C,REF(L,BARSLAST(黄金)),REF(L,BARSLAST(黄金)),2,0),COLORYELLOW;
STICKLINE(C,REF(H,BARSLAST(黄金)),REF(H,BARSLAST(黄金)),2,0),COLORCYAN;
STICKLINE(LAST3K AND 黄金,O,C,0.5,0),COLORYELLOW;
STICKLINE(LAST3K AND 准黄金,O,C,2,0),COLORYELLOW;
STICKLINE(LAST3K AND 将军,O,C,3,0),COLORYELLOW;
正向分形:=((C-REF(MA(C,6),1))/6+MA(C,6))*1.004,COLORWHITE;
正向定位:=CROSS(C,正向分形) AND 正向分形>REF(正向分形,1);
STICKLINE(正向定位,H,L,0,1),COLORRED,LINETHICK2;
STICKLINE(正向定位,O,C,1.8,0),COLORRED,LINETHICK2
好好学习天天向上
:victory::victory:
谢谢楼主分享，天天学习
好好发。好好好好发。好好发
倍量不穿选股
谢谢老师分享:)
希望可用，谢谢分享
感谢楼主分享
谢谢楼主分享
倍量不穿选股公式增强版--倍量不穿,后市翻番
谢谢楼主分享