DING:=MAX(O,C);{实顶}
DI:=MIN(O,C);{实底}
YANG:=(DI>=REF(DING,1)) OR (C>O AND NOT(DING<=REF(DI,1))) OR (C>REF(C,1) AND C=O) OR (C=REF(C,1) AND C=O AND REF(DING,1)=C);{阳线}
YIN:=NOT(YANG);
YANGSHENG:=YANG AND C>=REF(DING,BARSLAST(YIN)) AND (V>REF(V,BARSLAST(YIN)) OR (BETWEEN(V,REF(V,BARSLAST(YIN))*0.95,REF(V,BARSLAST(YIN))*1.05)));
YINSHENG:=(YIN AND C<=REF(DI,BARSLAST(YANG)) AND V>REF(V,BARSLAST(YANG)));
LIANGJIABI:=V/C;
MALIANGJIABI:=MA(LIANGJIABI,3);
LIANGJIABIXISHU:=1.5;
BLZ:=V>REF(V,1)*1.5;
PLZ1:=BETWEEN(V,REF(V,1)*0.95,REF(V,1)*1.05) OR BETWEEN(V,REFX(V,1)*0.95,REFX(V,1)*1.05) OR
(BETWEEN(V,REF(V,2)*0.95,REF(V,2)*1.05) AND V>REF(V,1)*1.2) OR
(BETWEEN(V,REF(V,3)*0.95,REF(V,3)*1.05) AND V>REF(MA(V,2),1)*1.2 AND V>REF(HHV(V,2),1)) OR
(BETWEEN(V,REF(V,4)*0.95,REF(V,4)*1.05) AND V>REF(MA(V,3),1)*1.2 AND V>REF(HHV(V,3),1));
PLZ2:=(BETWEEN(V,REF(V,5)*0.95,REF(V,5)*1.05) AND V>REF(MA(V,4),1)*1.2 AND V>REF(HHV(V,4),1)) OR (BETWEEN(V,REF(V,6)*0.95,REF(V,6)*1.05) AND V>REF(MA(V,5),1)*1.2 AND V>REF(HHV(V,5),1));
PLZ3:=(BETWEEN(V,REF(V,7)*0.95,REF(V,7)*1.05) AND V>REF(MA(V,6),1)*1.2 AND V>REF(HHV(V,6),1)) OR
(BETWEEN(V,REF(V,8)*0.95,REF(V,8)*1.05) AND V>REF(MA(V,7),1)*1.2 AND V>REF(HHV(V,7),1)) OR
(BETWEEN(V,REF(V,9)*0.95,REF(V,9)*1.05) AND V>REF(MA(V,8),1)*1.2 AND V>REF(HHV(V,8),1));
PLZ4:=(BETWEEN(V,REF(V,10)*0.95,REF(V,10)*1.05) AND V>REF(MA(V,9),1)*1.2 AND V>REF(HHV(V,9),1)) OR
(BETWEEN(V,REF(V,11)*0.95,REF(V,11)*1.05) AND V>REF(MA(V,10),1)*1.2 AND V>REF(HHV(V,10),1)) OR
(BETWEEN(V,REF(V,12)*0.95,REF(V,12)*1.05) AND V>REF(MA(V,11),1)*1.2 AND V>REF(HHV(V,11),1));
PLZ:=PLZ1 OR PLZ2 OR PLZ2 OR PLZ4;
GLZ:=V=HHV(V,3) AND V=REFX(HHV(V,3),2);
TLZ:=(V*1.1<REFX(V,1) AND REFX(V,1)*1.1<REFX(V,2)) OR (V>REF(V,1)*1.1 AND V*1.1<REFX(V,1)) OR (V>REF(V,1)*1.1 AND REF(V,1)>REF(V,2)*1.1);
JSLS:=C<=REFX(C,1) AND REFX(C,1)<=REFX(C,2) AND LIANGJIABI>REFX(LIANGJIABI,1) AND REFX(LIANGJIABI,1)>REFX(LIANGJIABI,2);
JZ:=BLZ OR GLZ OR PLZ OR TLZ;
JJZ:=CURRBARSCOUNT>=4 AND YANG AND (YANGSHENG) AND JZ AND REFX(LLV(DI,3),3)>=DI AND (REFX(MA(LIANGJIABI,3),3)<=LIANGJIABIXISHU*LIANGJIABI OR REFX(JSLS,1)) AND REFX(C,3)>=DING;
HJZ1:=JJZ AND REFX(MA(C,3),3)>=DING AND REFX(MA(LIANGJIABI,3),3)<=LIANGJIABI AND REFX(YANG,3);
HJZ2:=YANG AND YANGSHENG AND JZ AND REFX(DI,1)>=DI AND REFX(JJZ,2) AND REFX(C,2)>DING AND REFX(LIANGJIABI,1)<LIANGJIABI;
HJZ3:=YANG AND YANGSHENG AND JZ AND REFX(LLV(DI,2),2)>=DI AND REFX(JJZ,3) AND REFX(C,3)>DING AND REFX(MA(LIANGJIABI,2),2)<LIANGJIABI;
HJZ4:=JJZ AND REFX(LLV(DI,3),3)>=DING AND REFX(MA(LIANGJIABI,3),3)<=LIANGJIABI AND REFX(YANG,3) AND (REFX(YANG,1) OR REFX(YANG,2));
WP:=JJZ OR HJZ1 OR HJZ4 OR HJZ2 OR HJZ3;
CONDJJZ:=JJZ AND REF(NOT(WP),1);
CONDHJZ1:=(HJZ1 OR HJZ2 OR HJZ3) AND REF(NOT(WP),1);
A:=CONDJJZ OR CONDHJZ1;
LZT:=BARSLAST(A);
LZTJ:=LZT<=10 AND LZT>=5;
JTJ:=C>REF(L,LZT);
JXL:=V<=LLV(V,LZT);
LTJ:=V<LLV(V,LZT)*1.1;
ZF:=(C-REF(C,1))*100/REF(C,1);
ZFTJ:=ABS(ZF)<1;
V2T:=V/REF(V,1);
JDLS:=ZF<=0 AND V2T<1;
LSTJ:=COUNT(JDLS,LZT)>=2;
{LTJ:=V2T<0.8;}
AZMD:JTJ AND LTJ AND LZTJ AND LSTJ AND ZFTJ;
STICKLINE(AZMD,0,100,3,0),COLORRED;
长阴短柱:=C/REF(C,1)<0.95 AND V<HHV(V,30)/1.9;
最低柱距今:=BARSLAST(C=LLV(C,5));
末一为长阴短柱:=REF(C,最低柱距今)/REF(C,最低柱距今+1)<0.95 AND REF(V,最低柱距今)<HHV(V,30)/1.9;
末二为长阴短柱:=REF(C,最低柱距今+1)/REF(C,最低柱距今+2)<0.95 AND REF(V,最低柱距今+1)<HHV(V,30)/1.9;
末为长阴短柱:=末一为长阴短柱 OR 末二为长阴短柱;
长短距今:=BARSLAST(长阴短柱);
连跌好几天:=COUNT(REF(C,长短距今)<REF(C,长短距今+1),4)>=3;
半阴:=(REF(C,长短距今)+REF(C,长短距今+1))/2;
不是一字:=H<>L;
长阴短柱日真低:连跌好几天 AND C>=半阴 AND REF(O,长短距今) AND O>REF(C,长短距今) AND 长短距今<=2 AND 长短距今>0 AND 不是一字 AND 末为长阴短柱;
这么写，会多了很多信号，而且，漏过了末二长阴短柱的（本公式未写完），如何过滤那些无用信号？
最近两个月小鲁一直在研究连续缩量大跌的个股，并先后发帖《黄金长阴短柱，其后黄金无数》（点击可查）和《贵州燃气为什么再度成妖》（点击可查），介绍了黄金长阴短柱的必要条件和其后反弹的确认条件。
这里贴上科信技术等6只个股2018年4月26日的收盘留影，感兴趣的朋友可以观察总结操作技巧。
黄金长阴后首阳可以跟进的市场机理如下：连续缩量大跌表明洗盘充分，跳空高开的第一阳确认了真底，表明主力拉升的意愿，如果首阳是长阳矮柱，则表明主图高度控盘，其后当然会轻松拉升。
以下几点可作为重要的研判方法：
:victory::victory:
谢谢楼主分享。
感谢楼主的无私分享
学习了，谢谢！
小鲁是个专心钻研的老师，佩服
谢谢老师的分享
谢谢楼主分享
谢谢楼主分享
谢谢。想好好学习学习。
谢谢分享！
谢谢老师分享。
谢谢分享！
:handshake
谢谢分享。